is Dave capacitor ok for Microsquirt ign trigger?

This forum is for discussing ignition setup, tuning, and troubleshooting for MicroSquirt (TM)
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
jkeyzer
MegaSquirt Newbie
Posts: 6
Joined: Thu Mar 30, 2006 12:27 am

is Dave capacitor ok for Microsquirt ign trigger?

Post by jkeyzer »

The Microsquirt has the 'Dave capacitor' C27 installed (0.22uF). I noticed that the MSII docs say not to use a Dave capacitor if you are using OPTOIN as an ignition trigger. Is this true for Microsquirt, or can I keep the Dave capacitor and use OPTOIN+ for my trigger? Ideally I would like to avoid making any modifications to the Microsquirt board if possible!
Top
Matt Cramer
Super Squirter
Posts: 910
Joined: Sat Jul 03, 2004 11:35 am

Re: is Dave capacitor ok for Microsquirt ign trigger?

Post by Matt Cramer »

You shouldn't need to remove it.
Matt Cramer at DIY Autotune
Image
Top
Post Reply

Return to “Ignition Setup, Tuning, and Troubleshooting”