I am about to convert a car from MSII to microsquirt. Currently I am running MSII v3 with code 2.3 on GM 3.1 with GM HEI with low impedence throttlebody. I had the car running with a good tune(dynoed) but the owner just soaked the ECU and fryed it, since most of my installations are in offroad cars I thought microsquirt my be for me. What I would like to know Is will I be able to use the tables I currently have set up or do I start from the beginning. Also I know that I will loose the IAC what would be my other options.
Thanks
Blatzy
Microsquirt conversion from MSII
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
The code is identical, so all of your tuning will remain the same. The main things you will have to worry about are that you can't use low impedance injectors (at least not for 4 cyl and above) and the polarity of the tach input was changed. There are a few other wiring notes, so read the microsquirt section of the manual carefully. The other thing is if you are using MS2 extra code, I don't believe that is yet available for microsquirt.