needed.. base map for saxo vtr/106 xsi engine
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
citroaxgtr
- MegaSquirt Newbie
- Posts: 15
- Joined: Sat Jul 01, 2006 2:48 pm
- Location: swansea, united kingdom
- Contact:
needed.. base map for saxo vtr/106 xsi engine
im looking for a base map or information on setting up for a saxo vtr engine.. i have put this engine into my citroen ax
Hi there,
I wouldn't worry too much about getting a base map from someone else. Just follow the tuning instructions to create your own map. I just started the tuning process myself and found the generated map to be on the rich side (safe side) and I've been messing with the VE table to lean it out. A map from someone else with a similar engine probably wouldn't have helped a whole lot. Plus, but tuning it myself I'm gaining knowledge to handle things that may come later on.
-Patrick-
I wouldn't worry too much about getting a base map from someone else. Just follow the tuning instructions to create your own map. I just started the tuning process myself and found the generated map to be on the rich side (safe side) and I've been messing with the VE table to lean it out. A map from someone else with a similar engine probably wouldn't have helped a whole lot. Plus, but tuning it myself I'm gaining knowledge to handle things that may come later on.
-Patrick-
'81 Fiat Spider - Turbo charged, MSII, EDIS4
'04 SRT4 - Daily driver
'04 SRT4 - Daily driver