does my spark table look wrong ??

This forum is for discussing ignition setup, tuning, and troubleshooting for MicroSquirt (TM)
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
buncey
MegaSquirt Newbie
Posts: 14
Joined: Thu Jul 13, 2006 7:11 am

does my spark table look wrong ??

Post by buncey »

ok i have got my zetec turbo running but ive has to dissconnect the inlet pipe so theres no boost,

someone said i need to retard the ignition when it comes on boost, my spark table is wrong & the spark table needs to be adjusted for boost

anyone anyone know how i do this?

im useing v2.2 and 029q2

heres my current spark table, anyone please check it over for me.

Image
Top
PSIG
Experienced Squirter
Posts: 201
Joined: Fri Jun 11, 2004 11:02 pm
Location: Poulsbo, WA

Post by PSIG »

Check Lance's post here:
http://www.msefi.com/forums/viewtopic.php?t=9941
It's very informative and covers boosted situations too. Others have made handy calculation spreadsheets from this info such as Patrick's here: http://www.msefi.com/forums/viewtopic.php?t=20237
Read it all and you should be ready to go.
Image
David

OOPS! I see it was an attached file and attachments aren't showing yet, so here it is temporarily - I hope Patrick doesn't mind! http://psig.home.comcast.net/MS/IgnitionTimingSetup.xls
Top
Post Reply

Return to “Ignition Setup, Tuning, and Troubleshooting”