Just got larger injectors-quick question

For discussing injector selection, manifold modifications, throttle bodies, fuel supply system design and construction, and FIdle valves and IACs.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
PSIG
Experienced Squirter
Posts: 201
Joined: Fri Jun 11, 2004 11:02 pm
Location: Poulsbo, WA

Post by PSIG »

Don't forget folks that .001 resolution is not mandatory for tuning your idle - just tweak your fuel pressure up or down to the next .1 setting based on the over/undersize of your injectors so it's perfect. Idle is the first thing you tune and the base pressure can be tweaked at this time for a solid idle mix and the remainder of the VE table tuned from there. Hi-Res is nice but not a requirement for fine-tuning with huge injectors. Image

FWIW,
David
Top
Post Reply

Return to “Injectors, Fuel & Air Supply”