fuel pressure?

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
fasterblaster870
MegaSquirt Newbie
Posts: 5
Joined: Sun Mar 13, 2005 4:34 pm
Location: Armstrong County PA
Contact:

fuel pressure?

Post by fasterblaster870 »

i got a throttle body for a twin cyliner 600 2 stroke snowmobile. it has 2 injectors. any idea what kind of fuel pressure i should be running? i still have to buy a pump and a regulator. i'm guessing 35psi???
chicksdigwagons

Post by chicksdigwagons »

That kinda depends on the application, but all my EFI sleds are supposed to push ~43psi. Newer battery-less sleds may be spec'd for a lower PSI.
fasterblaster870
MegaSquirt Newbie
Posts: 5
Joined: Sun Mar 13, 2005 4:34 pm
Location: Armstrong County PA
Contact:

Post by fasterblaster870 »

thanks..its from a 98 and had a battery so your probly on with that.
Post Reply