Can't adjust fuel or PMW current limit%

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Clifton
MegaSquirt Newbie
Posts: 33
Joined: Tue Aug 02, 2005 7:25 am

Post by Clifton »

I can adjust PMW% but there isn't a difference in idle or afr's by going up or down. I can set it at 1%, 30% or 100% then try and change the Opening Time/Time Threshold. Doesn't matter what the % is set at, the lowest I can get the Opening Time and not have it instantly stall is 1.2. I have tried 1.0 with various % settings and then try changing the VE up but it still won't run. On Auto Tune I can lean it out or richen it up as far as I can and save it but it doesn't change the afr's.
Clifton
MegaSquirt Newbie
Posts: 33
Joined: Tue Aug 02, 2005 7:25 am

Post by Clifton »

Update.

I installed v2.1 on MT and running 2.1 on MT also and can now adjust VE and PMW%. I don't know why I am having trouble with v2.3 but atleast I can tune it now :D .
Post Reply