idle speed????

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
fiat132
MegaSquirt Newbie
Posts: 28
Joined: Tue Sep 20, 2005 12:22 pm
Location: EGYPT

idle speed????

Post by fiat132 »

does anyone know what cold idle speed i should be running with one of these things????

ms1 v2.2
Jedrik
Helpful Squirter
Posts: 78
Joined: Thu Oct 21, 2004 9:07 am
Location: Seattle WA
Contact:

Post by Jedrik »

That looks like a valve, I don't think it has a cold or hot idle speed. It just opens and closes.
RNash
MegaSquirt Newbie
Posts: 16
Joined: Fri Nov 05, 2004 1:52 pm
Location: (B'ham) Alabama, USA
Contact:

Post by RNash »

That would depend on a lot of variables, such as your engine displacement, and the size of vacuum source you have it connected to. But if it fully opens when cold, it should be close to the same rpm you would get if you disconnected the vacuum side while running.
arnold
Helpful Squirter
Posts: 62
Joined: Sun May 16, 2004 12:08 pm
Contact:

Post by arnold »

Hi Fiat 132 (nice car!), I use the same valve and decided to 'test' it by putting a manual valve in front of it. I want to know if the engines 'needs' the extra air at different temperatures.
MS1, MT2.25, extra code q2
http://kmnet.demon.co.uk/~arnold/
fiat132
MegaSquirt Newbie
Posts: 28
Joined: Tue Sep 20, 2005 12:22 pm
Location: EGYPT

Post by fiat132 »

thanks man....
what did u find out.....i tried it and it seemed to need the extra air...
my idle speed is set to 850 but when i start it it idles around 700...i am sure it should be around 1100 with the valve opened...its giving me a hard time as sometimes the rpm drops and afterstart enrichment kicks in and the car runs very badly...until its fully warmed

i checked out your site....good stuff :D :D :D :D
arnold
Helpful Squirter
Posts: 62
Joined: Sun May 16, 2004 12:08 pm
Contact:

Post by arnold »

I haven't tested yet, coming days I will. Mine also falls back into cranking
MS1, MT2.25, extra code q2
http://kmnet.demon.co.uk/~arnold/
fiat132
MegaSquirt Newbie
Posts: 28
Joined: Tue Sep 20, 2005 12:22 pm
Location: EGYPT

Post by fiat132 »

its very annoying.... i am glad to hear that the same thing happens with you...i dont really mean that :oops:
its just that i thought something might have been wrong with my ms
arnold
Helpful Squirter
Posts: 62
Joined: Sun May 16, 2004 12:08 pm
Contact:

Post by arnold »

tested it, the engine needs the air..... but I still have idling problems
MS1, MT2.25, extra code q2
http://kmnet.demon.co.uk/~arnold/
fiat132
MegaSquirt Newbie
Posts: 28
Joined: Tue Sep 20, 2005 12:22 pm
Location: EGYPT

Post by fiat132 »

i advanced the timing on my car which raised the idle speed...but it still goes into after start enrichment for no obvious reason
arnold
Helpful Squirter
Posts: 62
Joined: Sun May 16, 2004 12:08 pm
Contact:

Post by arnold »

what is the result of that?
MS1, MT2.25, extra code q2
http://kmnet.demon.co.uk/~arnold/
Post Reply