ve

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
fiat132
MegaSquirt Newbie
Posts: 28
Joined: Tue Sep 20, 2005 12:22 pm
Location: EGYPT

ve

Post by fiat132 »

i was just wondering...when i data log i get a column called ve....
my question is...is that the actual ve or is it the ve i entered in the map.if its the actual ve then i can just place those numbers in the map and the car should theoretically run fine
Top
Bernard Fife
Super Squirter
Posts: 1009
Joined: Mon Feb 16, 2004 3:15 pm

Post by Bernard Fife »

fiat132,

The VE you see in the datalogs is the interpolated value from the VE table. It is used to determine the injector pulse width.

Lance.
Top
Post Reply

Return to “Tuning Fuel and Air”