LED17 is set to "Squirt" but you've wired it to control your coil - this is why the injector settings changed your ignition.
Try setting it to "Spark A" and you'll get some spark control, make sure FIDLE is set to Idle control too.
James
only have spark on half of cyl's
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
jsmcortina
- MegaSquirt Guru
- Posts: 332
- Joined: Mon May 03, 2004 12:34 am
- Location: Birmingham, UK
- Contact:
My Success story http://www.msruns.com/viewtopic.php?t=8008
MS1/Extra at: http://www.msextra.com/manuals/MS_Extra ... _Index.htm
MS2/Extra at: http://www.msextra.com/ms2extra (runs on MS2 and Microsquirt)
MS1/Extra at: http://www.msextra.com/manuals/MS_Extra ... _Index.htm
MS2/Extra at: http://www.msextra.com/ms2extra (runs on MS2 and Microsquirt)