2001 e46 330i

This forum is for discussion of MicroSquirt (TM) from Bowling and Grippo. The MicroSquirt information site is at www.usEasyDocs.com
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
xn85turbo
MegaSquirt Newbie
Posts: 1
Joined: Wed Feb 08, 2006 12:04 pm
Contact:

2001 e46 330i

Post by xn85turbo »

Anyone implemented this solution on a E46 330i? I have a 2001 and I would like to build a custom turbo charger setup as the ones on the market are ungodly expensive. I am not to worried about all the mileage and mpg reaading from the stock ecu. What would I need to accomlish this task and is there a how-to for it?

Step 1: get car running on a mega squirt.
Step 2: add a turbo unit and tune mega squirt to use it.
project1
MegaSquirt Newbie
Posts: 2
Joined: Wed Jan 18, 2006 7:51 am

2001 e46 330i

Post by project1 »

Hello xn85turbo,
 
     There are many systems interconnected with the (Digital Motor Electronics) including auto trans., abs, cluster, steering angle sensor etc. all these systems are interconnected with a can-hi can-lo signal.  MS could be implemente on your engine but you will have to sort all this things out and hope it works (not to mention you will have to sort your ingnition out because your BMW is a COP setup) or use MS as a piggy back fuel controller.
 
Harry Perez   

 
On 2/8/06, xn85turbo <robert@xn85turbo.com (robert@xn85turbo.com)> wrote:

Anyone implemented this solution on a E46 330i? I have a 2001 and I would like to build a custom turbo charger setup as the ones on the market are ungodly expensive. I am not to worried about all the mileage and mpg reaading from the stock ecu. What would I need to accomlish this task and is there a how-to for it?



This post is at: http://www.msefi.com/viewtopic.php?p=100748#100748


Posted by email.
SiGmA_X
MegaSquirt Newbie
Posts: 1
Joined: Sun Jan 22, 2006 8:58 pm
Location: Oregon

Post by SiGmA_X »

How about on an e36? I have a 93 325 with a M50ut and I do not want to lose my ABS/gauges/etc...
'93 BMW 325is, Bilstein Sports w/ H&R Race Springs, M3 ZF 5spd tranny, M3 3.23 LSD, Custom CAI, missing interior mod ;-)
Post Reply