MSII V3.0 Megatune 2.25b748
Does anyone know how I can add BattV to my logging?
I'm trying to troubleshoot a tach signal problem (reports 0 for a few lines and nearly stalls the engine) and I'd like to see what the battery voltage is doing during this time.
Thanks!
How to Datalog battery voltage
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
BottleFed70
- Helpful Squirter
- Posts: 91
- Joined: Fri Jun 24, 2005 2:22 pm
How to Datalog battery voltage
1970 Ford Mustang
MSII, v3.0 PCB, v2.36 firmware, Megatune 2.25
MSII, v3.0 PCB, v2.36 firmware, Megatune 2.25
-
Bernard Fife
- Super Squirter
- Posts: 1009
- Joined: Mon Feb 16, 2004 3:15 pm
Bottlefed70,
See this for battery voltage logging: http://www.msefi.com/viewtopic.php?p=94 ... batt#94115
(Note that 'batteryVoltage' also needs to be in the 'Output Channels' in the INI file, but it should be there by default in MS-II in a line like:
batteryVoltage = { batADC / 255.0 * 30.0 } ; Current MS power supply voltage.
)
Lance.
See this for battery voltage logging: http://www.msefi.com/viewtopic.php?p=94 ... batt#94115
(Note that 'batteryVoltage' also needs to be in the 'Output Channels' in the INI file, but it should be there by default in MS-II in a line like:
batteryVoltage = { batADC / 255.0 * 30.0 } ; Current MS power supply voltage.
)
Lance.
-
BottleFed70
- Helpful Squirter
- Posts: 91
- Joined: Fri Jun 24, 2005 2:22 pm