Search found 7 matches

by Steve-O
Fri Sep 15, 2006 3:55 pm
Forum: Tuning Software
Topic: Erratic gauges/Connection issues.
Replies: 6
Views: 1018

A little update on this and what I've figured out so far:

1) Mini-Term fails to return a code version.
2) Cable seems Ok. Also purchased from diyautotune. Sold specifically for this app.
3) Loopback test on CABLE ONLY (pin 2 to pin 3) is successful. Returns characters; double characters with local ...
by Steve-O
Thu Sep 14, 2006 6:14 pm
Forum: Tuning Software
Topic: Erratic gauges/Connection issues.
Replies: 6
Views: 1018

Erratic gauges/Connection issues.

The assembled MS2 comes from http://www.diyautotune.com ; same with the stim and relay board.

The board 'looks' clean and well put together (if that means anything). I don't want to try and go back on them until I'm confident that I've not missed anything. I should have time in the morning to go ...
by Steve-O
Thu Sep 14, 2006 6:14 pm
Forum: Tuning Software
Topic: Erratic gauges/Connection issues.
Replies: 6
Views: 1018

The assembled MS2 comes from http://www.diyautotune.com ; same with the stim and relay board.

Typing an 'S' in Mini Term returned ** (two asterisks). I tried it again and it gave me this: *( ll "$ ; Each time I type a capital 's', it returns some combination of asterisk(s), parenthesis, dollar ...
by Steve-O
Thu Sep 14, 2006 11:16 am
Forum: Tuning Software
Topic: Erratic gauges/Connection issues.
Replies: 6
Views: 1018

Erratic gauges/Connection issues.

I'm just trying to get my MegaTune and MS2 started. Running on Windows XP.

I installed Megatune 2.25; activated megasuirt-ll.ini 2.3; set code variant for MS_ll in settings; set port to COM1 and 115,200; set interwrite delay to 5; basically following all instructions correctly.

Problem is when I ...
by Steve-O
Thu Sep 14, 2006 11:16 am
Forum: Tuning Software
Topic: Erratic gauges/Connection issues.
Replies: 6
Views: 1018

Erratic gauges/Connection issues.

I'm just trying to get my MegaTune and MS2 started. Running on Windows XP.

I installed Megatune 2.25; activated megasuirt-ll.ini 2.3; set code variant for MS_ll in settings; set port to COM1 and 115,200; set interwrite delay to 5; basically following all instructions correctly.

Problem is when I ...
by Steve-O
Mon Sep 11, 2006 11:19 am
Forum: Ignition Setup, Tuning, and Troubleshooting
Topic: ka24e Dizzy Questions
Replies: 24
Views: 3034

Great, thanks for the info. I'm going to go ahead and order, since it sounds as if this will work just fine.

One little clarification though. My distributor has been modded for an MSD ignition. The power transistor (what you call ignitor) has been clipped and no longer triggers the coil directly ...
by Steve-O
Sun Sep 10, 2006 1:15 am
Forum: Ignition Setup, Tuning, and Troubleshooting
Topic: ka24e Dizzy Questions
Replies: 24
Views: 3034


I've been doing some research and found that all KA24E and KA24DE powered Nissan's (at least the US models) should be compatible with the MegaSquirt-2 and allow for complete fuel and spark control without giving you any trouble.

Do you mean to suggest that triggering MS2 is possible using a '95 ...