Thanks lance I will give it a go and post up the results..... I think it will be too much fuel as it does pop/backfire some times, but I guess it is too rich as it does black smoke. I have yet to test it under load.
I am only using TPS AE and X-Tau...... should X-Tau be changing at idle??? only a ...
Search found 8 matches
- Fri Aug 13, 2010 3:18 am
- Forum: Tuning Fuel and Air
- Topic: sometimes dies after a stab of the throttle??
- Replies: 3
- Views: 705
- Thu Aug 12, 2010 2:53 am
- Forum: Tuning Fuel and Air
- Topic: sometimes dies after a stab of the throttle??
- Replies: 3
- Views: 705
sometimes dies after a stab of the throttle??
ve table reasonably ok upto around 180kpa and around 5000rpm
I have been playing with AE and so far this is the best it has been I am yet to try this on the road
Here is a log of what happens
I have been playing with AE and so far this is the best it has been I am yet to try this on the road
Here is a log of what happens
- Mon May 03, 2010 9:38 am
- Forum: Injectors, Fuel & Air Supply
- Topic: Do I need a diode across the IAC valve?
- Replies: 2
- Views: 748
Re: Do I need a diode across the IAC valve?
Well I have added a diode and it now seems to work although only over a short range of about 20-50% seems to be best on about 160hz
At least this will give me something to work with.
Any suggestion of how to spread the effect working band of the IAC?
At least this will give me something to work with.
Any suggestion of how to spread the effect working band of the IAC?
- Mon May 03, 2010 9:09 am
- Forum: Injectors, Fuel & Air Supply
- Topic: Do I need a diode across the IAC valve?
- Replies: 2
- Views: 748
Do I need a diode across the IAC valve?
Do I still need a diode across the IAC like the normal MS2, or is it part of the IC. Looking at the schmatic for the IC looks as if it has flyback diode within.
I have a 2 wire bosch IAC valve from a 16v MK2 golf gti for referance if anyone knows setting that will work with it?
I have a 2 wire bosch IAC valve from a 16v MK2 golf gti for referance if anyone knows setting that will work with it?
- Mon May 03, 2010 8:28 am
- Forum: Tuning Fuel and Air
- Topic: strange idle problem
- Replies: 5
- Views: 916
Re: strange idle problem. !!SOLVED!!
Problem solved!!
I had all the warm up enrichments set to 0% now set to 100% i guess this is correct? from my understanding that makes no enrichment
and anything over 100% adds more?
Run the engine up to around 95*c fully warmed and it ran fine and the log showed NO WUE or ASE.
Managed to take ...
I had all the warm up enrichments set to 0% now set to 100% i guess this is correct? from my understanding that makes no enrichment
and anything over 100% adds more?
Run the engine up to around 95*c fully warmed and it ran fine and the log showed NO WUE or ASE.
Managed to take ...
- Sun May 02, 2010 2:55 pm
- Forum: Tuning Fuel and Air
- Topic: strange idle problem
- Replies: 5
- Views: 916
Re: strange idle problem
Can anyone help me??
From the log it looks to me as if the warmup enrichment is on.... but in Tunerstudio it is disabled
From the log it looks to me as if the warmup enrichment is on.... but in Tunerstudio it is disabled
- Sat May 01, 2010 9:10 am
- Forum: Tuning Fuel and Air
- Topic: strange idle problem
- Replies: 5
- Views: 916
Re: strange idle problem
Ok will do
I have added an IAT sensor between the outlet of the supercharger and the inlet ports.
As requested files attached.... I am execting there is some stupid I have done. It is only a short log as the engine was fairly warm already but this might help.
I have added an IAT sensor between the outlet of the supercharger and the inlet ports.
As requested files attached.... I am execting there is some stupid I have done. It is only a short log as the engine was fairly warm already but this might help.
- Thu Apr 29, 2010 3:02 pm
- Forum: Tuning Fuel and Air
- Topic: strange idle problem
- Replies: 5
- Views: 916
strange idle problem
Here is the full story I have built a mini with a suck through supercharge setup with a throttle body and injectors on the the inlet to the charger which has been proven to work by a certain company. I am using 2injectors alternating, 2squirts
I have basically copied the kit!!
I have got my ms ...
I have basically copied the kit!!
I have got my ms ...