I'm currently connecting my uS(V2) with my notebook via USB-Serial adapter. That's works fine.
When I setup the comm. with uS, I need to set OFF the FIFO buffer of the COM port setting.
Search found 4 matches
- Fri Jul 10, 2009 3:56 pm
- Forum: Installation, Wiring and Sensors
- Topic: Microsquirt - No Comm
- Replies: 11
- Views: 1327
- Mon Jul 06, 2009 7:20 pm
- Forum: Tuning Fuel and Air
- Topic: Knock control with uS and MS-Seq
- Replies: 11
- Views: 2357
Re: Knock control with uS and MS-Seq
I found that Hardware schematics for uS was updated and #5 pin is connecting to AD07.
http://www.microsquirt.info/us_hardware.htm
But, I can't control knock with V2.89 code+JimStim .. I hope it will be support near future.
http://www.microsquirt.info/us_hardware.htm
But, I can't control knock with V2.89 code+JimStim .. I hope it will be support near future.
- Mon Jul 06, 2009 7:30 am
- Forum: Tuning Fuel and Air
- Topic: Knock control with uS and MS-Seq
- Replies: 11
- Views: 2357
Re: Knock control with uS and MS-Seq
Apparently the "knock pin" (#5 on the uS Ampseal?) is not used and the witing chart is right.
Brian
When I input 5V to #5 on the uS Ampseal ( yes Ampseal has #5 as labeled "MAF") knock voltage will be 0V to 1.3V in Realtime Display of the Tuner Studio. Also if I configure to "MAF on knock pin ...
- Mon Jul 06, 2009 1:23 am
- Forum: Tuning Fuel and Air
- Topic: Knock control with uS and MS-Seq
- Replies: 11
- Views: 2357
Re: Knock control with uS and MS-Seq
Well, May be it is a MegaTune or firm ware issue, but uS can't handle knock pin when I test it.
The wire of 5 pin at uS is labeled as 'MAF' but I couldn't configure 'MAF on knock pin'.
Also uS couldn't configure as 6 Cyl. wasted spark with using D15 and D16 by MS2-extra.
That's means you should ...
The wire of 5 pin at uS is labeled as 'MAF' but I couldn't configure 'MAF on knock pin'.
Also uS couldn't configure as 6 Cyl. wasted spark with using D15 and D16 by MS2-extra.
That's means you should ...