MicroSquirt.com read only forum (Jan.15,2018)

dridders
Sorry, yes I misunderstood and I will investigate your way...too...
20A max, that's what I had in mind too, but not so sure somebody experiment that already. . .as it may represent 16 injectors in staging/2 channels.
Other than cooling fuel injector Voltran claim also that by injecting ...

dridders
I will prefer to stay stock whereas starting to modify the board with things I do not really understand, I am not an electronic wizard and do not want to f..k up. So, I would like to know if somebody try 8 Hi Z on each channel first. Unless you have a comprenhesive diagram of improving the ...

hi all, Lance.

Very simple question :
How many high Z (15 hom) injectors I can drive with let's say channel 1, and how many high Z (10hom) injectors on channel 2.
My intended set up is for 8 injectors gasoline on channel 1 and 8 LPG injector on channel 2 using dual table switching and B&G for ...

65looter,
Here are the pictures. You will see clearer what I am talking about.
My FPR is an AEM. On the side of it I fit a pressure gauge connector I can take out in a second.

Everything is fitted on a rover V8 250 ci. I did this cause I am firing 2 squirt simultaneous on one channel, the other ...

65looter,
This is what I did, you will find the XL diagram and component rating and a usefull link :
http://www.kinsler.com/
forget about the girl (pretty) on the cover page, download their catalog and read from page 71 and on.

If you want I have a pix of my own parallel injector feeder plumbing ...

Hi all,
I had my engine (Landrover aged and used V8 215ci port injection) fired last Friday with MS V3+MSII+Relayboard (latest code and MT2.25).
Everything perfect including IAC. I used a WBO2 LSU from TE, same... almost perfect unless 0.4 AFR delay in between MS and TE display (even if sharing ...

Hi all,
This post for the ones who get the Rover V8 with original Rover IAC set up (Range Rover 3.9L style).
I wirred the IAC to the Relay Board this way :
S1 IAC1 A= Bleue
S2 IAC1 B= Orange
S3 IAC2 A= green
S4 IAC2 B= Red
In megatune, I use "Stepper moving only" and the std set up, ie 160 for ...

Pat, :D
I was hoping you were around... ahah :oops:



"But you'll need an extra relay to siwtch power to both injectorbanks.
I'm using a single pole switch on my dash wich operates both the table switching and the power switching relay". I was intending to switch 5V only to the JS9, I will need ...

Hi All, :D
The following are pure newbie question, but I just would like to start fine.
I intend to convert a Rover V8, running on Edelbrok 500cfm carb and Tartarini LPG gaz injection to MS V3/MSII using the latest code. At first the mod will be applied on the 3,5 Ltr (215 Ci) and once everytning ...