MicroSquirt.com read only forum (Jan.15,2018)

Hi,
I'm new in this field, pardon for my noobness

I am using Microsquirt V2.88 on Modenas Kriss 110cc 4 stroke, same engine with Kawasaki KSR 110cc
I had off all the additional features such as acceleration enrichment, EGO, etc. Just wanna tune the basic VE table.
Tried to use the VE table generator, but my engine displacement is too small for that function.
The engine can start easily, but when WOT, it stumble.
Any body can help me with req fuel & VE table?
this is the known spec of the engine:
Max power = 6.6kW/8500 RPM
Max Torque = 9.3Nm/4000RPM
Max RPM = 12000
Engine Displacement = 111cc

Lie to the VE table generator. Tell it you have a 1110cc engine that puts out 66kW @ 8500rpm with 93 Nm @ 4000 rpm, max 12000 rpm. The table will be the same, just make sure your req_fuel, displacement, and injector size is entered correctly.

Thanks, I had tried it, and it works.
Now need to fine tune the VE tables and other function