Hey there. needing help with some issues....
VRIN- VRIN+ OPTOIN- OPTOIN+ need to know which one runs off a regular tach signal.
any help would be greatly appreciated.
tach signal ?
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: tach signal ?
I used the option+ pin 30 too the tach signal and the option- pin 31 grounded. That worked well for maybe 1 1/2 hours then no signal. Then i installed a diode inline on the option+ and that fixed it.