No spark at all!!!

This forum is for discussing ignition setup, tuning, and troubleshooting for MicroSquirt (TM)
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Ijuswonaseng
MegaSquirt Newbie
Posts: 1
Joined: Tue Sep 12, 2006 11:21 pm

No spark at all!!!

Post by Ijuswonaseng »

ok...I have Ms Vs1 installed on my car (VW16v Gti). Thow it was untuned, it ran. One night I was changing somethings in Mega Tune(2.25), it basically got flooded, burnt the spark plugs and wouldn't start again. I changed the plugs the next day and it still didn't start. I have power at every point, dizzy and all but, still yet no spark. The fuel pumps runs, the computer reads everything, and the light on the ecu stays on while key is in crank mode...WHAT COULD THE PROBLEM REALLY BE? I some how feel it has to do settings in megatune,but I don't what to do? ALL HELP IS APPRECIATED!
thnx :RTFM: :(
jsmcortina
MegaSquirt Guru
Posts: 332
Joined: Mon May 03, 2004 12:34 am
Location: Birmingham, UK
Contact:

Post by jsmcortina »

How about reading the response I posted to your near identical question yesterday?

http://www.msefi.com/viewtopic.php?t=22458

James
Post Reply