Page 1 of 1
spark plugs
Posted: Mon Jul 03, 2006 6:30 pm
by elturbonitroso
hi guys i would like to know if i can use non resistors plugs with the ms1.
Posted: Tue Jul 04, 2006 1:48 am
by jsmcortina
It all depends on what coil you have and what is driving the coil.
Whether it is MS1 or MS2 doesn't matter.
James
Posted: Tue Jul 04, 2006 5:56 am
by elturbonitroso
i have a msd 6al driving the coil and a msd coil.
Posted: Tue Jul 04, 2006 6:12 am
by whittlebeast
The less resistance in the plugs and wires will cause ringing in the coil that will in turn drive your radio and the radio in the car next to you nuts. As far as I know resistor pulgs have no downside.
AW
Posted: Tue Jul 04, 2006 2:29 pm
by elturbonitroso
yes i know about the radio interference but i need coolder plugs and i can only get non resistors plugs for my aplication.
Posted: Tue Jul 04, 2006 4:00 pm
by jakobsladderz
If you use resistor leads you would be right I'd say, just don't use metal core spark leads with non-resistor plugs and you'll be right..