Inj#1 Cranking PW = 34.3ms @ 14*C - reasonable?
Posted: Thu Jan 19, 2006 10:48 am
Just trying to verify the stock calibration and make sure I'm reading it right - my stock computer says it's doing 34.3ms for cranking pulse width at 14*C. Engine is a boxer-4 2.5L SOHC and I'm using stock injectors which are supposingly 280cc/min
Another question is whether the curve of cranking pulse width vs coolant temperature is linear - I'm guessing it's not.
Another question is whether the curve of cranking pulse width vs coolant temperature is linear - I'm guessing it's not.