2-wire Ford PWM Idle Valve configuration

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
EstateAgent
MegaSquirt Newbie
Posts: 16
Joined: Tue Jan 11, 2005 4:01 am
Location: Born in the U-UK (but im not from Brighton)

Post by EstateAgent »

I 'scoped the MS today, before realising the MAP sensor was disconnected (so it was fueling as if it were WOT).
Didn't have much time, but the readings were just everywhere!
Ignition off seems to pickup a clean saw wave, so theres a little interference getting at the scope somewhere. With EEC-IV plugged in, that was non-existant.

Will have to stop for the moment as the owner wants it back now :P
So I'll have to finish mine!
Geared Ghia - UK Ford Escort 1800.
Top
Post Reply

Return to “Tuning Fuel and Air”