Epoxy In Injector Pockets

For discussing injector selection, manifold modifications, throttle bodies, fuel supply system design and construction, and FIdle valves and IACs.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
WhiteRaider
MegaSquirt Newbie
Posts: 2
Joined: Mon Jan 31, 2005 10:05 am

Epoxy In Injector Pockets

Post by WhiteRaider »

Does anyone know a good source to get four of these. I only need 4 so I don't really want to buy 8 of the MSD.

Also, I know that you can get four of the Holley pockets, but it doesn't mention that they are epoxy in. Has anyone used them in this way?

Cheers!
GotDart
MegaSquirt Newbie
Posts: 6
Joined: Sun Oct 03, 2004 5:00 am
Location: Houston, TX

Post by GotDart »

I just bought a set of 8 on eBay for $40. There was another seller with sets of 8 for $45, but the listing also says sets of 4 are available for $25. The sellers ID is br340. His current auction number is 8028074479.
GotDart
MegaSquirt Newbie
Posts: 6
Joined: Sun Oct 03, 2004 5:00 am
Location: Houston, TX

Post by GotDart »

I see rossmachineracing also has sets of 4 listed on eBay for $30.
WhiteRaider
MegaSquirt Newbie
Posts: 2
Joined: Mon Jan 31, 2005 10:05 am

Post by WhiteRaider »

Thanks, I looked on ebay but didn't get the right search string. $25. is not a bad deal at all!

Cheers!
Post Reply