Hello,
I am in the planning stages of a Microsquirt solution. My plan would be to use it on a 4 cylinder engine, in a wasted spark, batch fire configuration with a 36-1 trigger wheel. My question is, can I pair two LS1/2 coils together, per ignition trigger output (for a total of 4 coils) from the microsquirt to create the wasted spark solution.
Microsquirt Spark Output questions
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
96 Comp T/A
- MegaSquirt Newbie
- Posts: 5
- Joined: Thu Mar 10, 2005 6:22 pm
Re: Microsquirt Spark Output questions
A fellow had a similar question not so long ago over on the Extra forum; one of the Wise Knowers of Things said that it should be fine.
-
96 Comp T/A
- MegaSquirt Newbie
- Posts: 5
- Joined: Thu Mar 10, 2005 6:22 pm