microsquirt tach output wire?
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
microsquirt tach output wire?
I have a question about the tach output wire that comes from the microsquirt, it is the green/yellow wire. Does anyone know what kind of signal it puts out?
-
Matt Cramer
- Super Squirter
- Posts: 910
- Joined: Sat Jul 03, 2004 11:35 am
Re: microsquirt tach output wire?
Thanks Matt,
I am wanting to use that wire to signal a board to allow the board to read the rpms of the machine and send a signal out to run a servo to control a power valve.
I am wanting to use that wire to signal a board to allow the board to read the rpms of the machine and send a signal out to run a servo to control a power valve.