Code/ CID parameter
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Code/ CID parameter
How is the parameter for cid used? Is it used in the fueling equation at all? or is it only used when using a maf. (for converting maf to map values). And has no effect what so ever in speed density or alpha-n.
-
Matt Cramer
- Super Squirter
- Posts: 910
- Joined: Sat Jul 03, 2004 11:35 am
Re: Code/ CID parameter
CID is used in REQ_FUEL calculations but that is not during engine operation.