coolant temp correction?

For discussing MicroSquirt (TM) configuration and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
supertuner
Helpful Squirter
Posts: 43
Joined: Wed Apr 29, 2009 3:54 pm

coolant temp correction?

Post by supertuner »

Is there somehow a coolant temp correction? Heat has the biggest impact over anything else. My motor runs good until it gets warm then it goes lean. I am running methanal so it tends to evaporate alot more the hotter your motor is. Any ideas on this?
Matt Cramer
Super Squirter
Posts: 910
Joined: Sat Jul 03, 2004 11:35 am

Re: coolant temp correction?

Post by Matt Cramer »

That would be the warm up enrichment settings. You need to dial the motor in when it's hot, then come back and set the warm up enrichments to their final values.
Matt Cramer at DIY Autotune
Image
Post Reply