Hi, i'm looking at using external ignition drivers for my MS install and have been reccomended a VW or Audi part, does anyone know the ideal ones to use and part numbers for these?
Thanks
Ignition Drivers
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
CraigyBoy
- MegaSquirt Newbie
- Posts: 3
- Joined: Wed Oct 01, 2008 1:56 pm
- Location: Midlands, England, United Kingdom
Ignition Drivers
Derby Uni Motorsport, Level 2 Student
-
obxer
- MegaSquirt Newbie
- Posts: 27
- Joined: Fri Aug 03, 2007 8:13 am
- Location: Nags Head, NC USA
- Contact:
Re: Ignition Drivers
I don't know which one is "ideal". The 211 is the one listed in the manual - http://www.microsquirt.info/Bosch_211.htm After a lot of research I used an older 2 channel unit. There is some info that might help you here - http://www.tfelectronics.com.au/PageFiles/ignition.html.
I had a hard time finding the connector here in the states. The connector for the 7 pin units is - 1 287 013 005. The AMP / tyco electronics number is 144477-1. I ended up ordering it from here http://www.eagleday.com/ampconnectors.html. It was expensive but after lots of searching and inquiries this is the ONLY place I could find that stocked it. But if iirc I came up with several suppliers for both parts over on your side of the pond. There's also info on the Bosch website.
I had a hard time finding the connector here in the states. The connector for the 7 pin units is - 1 287 013 005. The AMP / tyco electronics number is 144477-1. I ended up ordering it from here http://www.eagleday.com/ampconnectors.html. It was expensive but after lots of searching and inquiries this is the ONLY place I could find that stocked it. But if iirc I came up with several suppliers for both parts over on your side of the pond. There's also info on the Bosch website.