in megatune it asks for your cranking speed.
do you set it to below your actual speed or over ?
i ask this because is this the point when the ecu switches from cranking to running ?
Cranking speed
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: Cranking speed
The significance of cranking speed is that above it the processor stops trigger rise mode for ignition and stops sending simultaneous, fixed width crank pulses for the injectors.
-
Bernard Fife
- Super Squirter
- Posts: 1009
- Joined: Mon Feb 16, 2004 3:15 pm
Re: Cranking speed
pommie02,
Just to add a bit to what Al says, you want to set the cranking speed *above* your actual cranking speed because you want the cranking settings in effect always while cranking. There's more here: http://www.megamanual.com/mt28.htm#so
Lance.
Just to add a bit to what Al says, you want to set the cranking speed *above* your actual cranking speed because you want the cranking settings in effect always while cranking. There's more here: http://www.megamanual.com/mt28.htm#so
Lance.