Mircro Squirt triggering, help needed!!
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Mircro Squirt triggering, help needed!!
I was reading through the Mircro Squirt manuals and checking the wiring schematic. I couldn't find how the uS was triggered.
I'm planning to install Micro Squirt on my motorbike (Yamaha Vmax, 4 pick-up coils, 4 coils, 1-3-2-4 firing sequence, odd fire). I'll just use Micro Squirt for fuel.
Mega Squirt is triggered via the coil's negative. What about micro squirt?
Thanks for your help.
Mitch
-
newtyres1
- Helpful Squirter
- Posts: 139
- Joined: Mon Feb 06, 2006 7:32 pm
- Location: Brisbane, Australia
http://www.microsquirt.info/uswiring.htm
and schematics here: http://www.microsquirt.info/ then click on "hardware".
Ian.
-
Dave Sloan
- MegaSquirt Newbie
- Posts: 13
- Joined: Wed May 12, 2004 2:01 am
- Location: Brisbane, queensland
http://www.saarloos.net/
-
coilmscoyle
- MegaSquirt Newbie
- Posts: 2
- Joined: Thu Dec 14, 2006 6:38 am
Mircro Squirt triggering, help needed!!
I know that the ignition trigger on the Vision and the Max is an AC wave. The pickups are a coil and they generate when the steel bar on the flywheel passes by. With the Vision we could set polarity of the trigger signal to match what needs to be used in the uS. I think ignition and FI should be done with the uS just to give us the tunability that the stock ignition doesn't have. Do the VMax ignitions have 4 pickups?
Coil