looking for a spark base map for V8 ford

This forum is for discussing ignition setup, tuning, and troubleshooting for MicroSquirt (TM)
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
65looter
Experienced Squirter
Posts: 157
Joined: Mon Mar 27, 2006 5:56 am
Location: London
Contact:

looking for a spark base map for V8 ford

Post by 65looter »

Hello everyone,

I am after a base map for a V8 Ford (342 stroker, but 302 will do)
If anyone is using such engine, please can you post your map?

Thanks a lot
Stephane
cscm094
MegaSquirt Newbie
Posts: 7
Joined: Thu Feb 17, 2005 5:01 pm

Post by cscm094 »

65looter
Experienced Squirter
Posts: 157
Joined: Mon Mar 27, 2006 5:56 am
Location: London
Contact:

Post by 65looter »

thanks, I had seen that link.
I am after a map being used, I have tried the calculator from
http://planetcampbell.us/IgnitionAdvanc ... timate.sxc

and I am getting some weird results.
KPa
100 16.0 16.0 20.0 24.0 28.0 32.0 36.0 36.0 36.0 36.0 36.0 36.0
80 22.0 22.0 26.0 30.0 34.0 38.0 42.0 42.0 42.0 42.0 42.0 42.0
70 25.0 25.0 29.0 33.0 37.0 41.0 45.0 45.0 45.0 45.0 45.0 45.0
60 28.0 28.0 32.0 36.0 40.0 44.0 48.0 48.0 48.0 48.0 48.0 48.0
55 29.5 29.5 33.5 37.5 41.5 45.5 49.5 49.5 49.5 49.5 49.5 49.5
50 31.0 31.0 35.0 39.0 43.0 47.0 51.0 51.0 51.0 51.0 51.0 51.0
45 32.5 32.5 36.5 40.5 44.5 48.5 52.5 52.5 52.5 52.5 52.5 52.5
40 34.0 34.0 38.0 42.0 46.0 50.0 54.0 54.0 54.0 54.0 54.0 54.0
35 35.5 35.5 39.5 43.5 47.5 51.5 55.5 55.5 55.5 55.5 55.5 55.5
30 37.0 37.0 41.0 45.0 49.0 53.0 57.0 57.0 57.0 57.0 57.0 57.0
25 38.5 38.5 42.5 46.5 50.5 54.5 58.5 58.5 58.5 58.5 58.5 58.5
20 40.0 40.0 44.0 48.0 52.0 56.0 60.0 60.0 60.0 60.0 60.0 60.0
500 800 1000 1500 2000 2500 3000 3500 4000 4500 5000 6000 RPM
boost junkie
Helpful Squirter
Posts: 62
Joined: Tue May 11, 2004 7:58 am
Location: dallas texas usa

Post by boost junkie »

That's quite a bit of spark advance. Might want to drop all of those numbers by at least 10.
-shawn
msns-e controled turbo neon
sample msq's!
BottleFed70
Helpful Squirter
Posts: 91
Joined: Fri Jun 24, 2005 2:22 pm

Post by BottleFed70 »

The advace looks good for the high KPA map areas, but might be a little much for the low KPA areas.
1970 Ford Mustang
MSII, v3.0 PCB, v2.36 firmware, Megatune 2.25
Post Reply