Water Injection on MSII?

This forum is for discussion of MicroSquirt (TM) from Bowling and Grippo. The MicroSquirt information site is at www.usEasyDocs.com
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
2WHEELENGR
MegaSquirt Newbie
Posts: 15
Joined: Tue Feb 14, 2006 10:39 am
Location: Memphis, TN
Contact:
Contact 2WHEELENGR

Water Injection on MSII?

Post by 2WHEELENGR »

Can I use MSII to run water injection like the previous versions? :RTFM:
Everything COUNTS when you're racing the CLOCK!
2WHEELENGR.com
Top
grippo
MegaSquirt Guru
Posts: 921
Joined: Mon Feb 16, 2004 6:55 pm

Post by grippo »

There are general purpose spare ports for this purpose, but the logic for activating them has to be simple, like if coolant > x and/or rpm > y or some such thing. Read about spare ports in the manual and see if they will do what you want.
Top
tebriel
Helpful Squirter
Posts: 79
Joined: Tue May 18, 2004 6:32 am
Location: WI
Contact:
Contact tebriel

Post by tebriel »

check out the port settings under the settings menu I believe. you can use the FIdle circuit to ground your pump perhaps?
Top
Post Reply

Return to “MicroSquirt General Information”