I am working to get my MS1 ver3.0 MSnS-Extra to control my stock BAC valve. I have tested using the stim and in "warmup" mode I can see the FIdle
LED go from dim to bright in response to coolant teemperature changes. If I have it set for "closed loop" instead of "warmup" the FIdle LED only blinks off for about one second then on for a couple of seconds no matter where the coolant temp is. Ive tried this in the car as well but no idle control in closedloop. I want this to control idle in closed loop as my warmup idle is controlled by a seperate control (thermowax) I know the BAC valve good cause it works fine with the stock ECU.
My car is a 1986 Mazda RX7, none turbo, bone stock except for the MS and the LC1 wideband. I`m also having trouble getting Autotune to work....................but thats another post I`ll put up after I get this problem solved.
TIA
PWM
Forum rules
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
2713ddddavid
- MegaSquirt Newbie
- Posts: 7
- Joined: Sat Apr 15, 2006 1:24 pm