How to check ignition timing
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
How to check ignition timing
im running edis ignition with the 36-1 wheel on my bottom pulley, how do i go about checking my timing with my timing light?
Have you got a timing mark on your flywheel and do you know what degrees it represents?
On mine the timing mark is 6 DBTDC, so I set "fixed angle" to 6 and check the mark lines up with the mark on the casing with the strobe, if not you need to adjust your spark settings (presume it`s still trigger angle when using edis?).
With no MS connected the Edis should revert back to 10 DBTDC (safe Mode) if you`ve lined the wheel up correctly.
On mine the timing mark is 6 DBTDC, so I set "fixed angle" to 6 and check the mark lines up with the mark on the casing with the strobe, if not you need to adjust your spark settings (presume it`s still trigger angle when using edis?).
With no MS connected the Edis should revert back to 10 DBTDC (safe Mode) if you`ve lined the wheel up correctly.
Squirted VW GTI 16vG60 mk2