injector wiring setup for sbc v8
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
lani16
- MegaSquirt Newbie
- Posts: 16
- Joined: Wed May 24, 2006 5:53 pm
- Location: California US
- Contact:
injector wiring setup for sbc v8
msII v3 2.5 small block chevy ok i need info on how to wire up my fuel injectors(they are 12 ohms or hight imp) to the relay box. my biggest question is if i should wire upp one bank to each inj wire or if i have to match upp the injectors that are firing at the same time if any of you have a dyagram for a v8 that would really help as i will be asking questions about the rest of the wiring here shortly thanxx
US Goverment Policy>If It Ain't Broke Fix It Ti'll It Is<
-
TT350chevelle
- MegaSquirt Newbie
- Posts: 26
- Joined: Sun May 02, 2004 7:51 am
- Location: Winnipeg,Canada
- Contact:
Injector wiring has very little effect on how the engine runs, this is a batch fire system.I have tried 2 setups 1,3,5,7 on channel 1 and 2,4,6,8 on channel 2 and there was no noticable difference between 1,4,6,7 ch1 and 8,3,5,2 ch2.
Although I never noticed any difference in the engine, I continue to use setup #2 , this setup uses 2 cylinders from each bank on channel 1 and the same for channel 2,only because this should reduce the possibility of fuel pressure pulsations.
Brad J.
Although I never noticed any difference in the engine, I continue to use setup #2 , this setup uses 2 cylinders from each bank on channel 1 and the same for channel 2,only because this should reduce the possibility of fuel pressure pulsations.
Brad J.