coils on plugs

This forum is for discussing ignition setup, tuning, and troubleshooting for MicroSquirt (TM)
Forum rules
Read the manual to see if your question is answered there before posting. If you have questions about MS1/Extra or MS2/Extra or other non-B&G code configuration or tuning, please post them at http://www.msextra.com The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
stevenford_uk
MegaSquirt Newbie
Posts: 4
Joined: Sat Jul 23, 2005 3:21 pm
Location: england

coils on plugs

Post by stevenford_uk »

does anyone know if megasquirt would allow me to use a coil on plug setup instead of ht leads (i have a full set off a yamaha R1) they gave 6bhp increase on my dads mates sidecar racer on the dyno, so wondering if i can use the same setup on my mx5, would deffo be better than leads.
1992 eunos roadster v-spec
stainless tubular manifold
stainless system
fully ported and polished
need help with throttle body issues
Bill Shurvinton
MegaSquirt Newbie
Posts: 23
Joined: Fri May 07, 2004 1:20 pm
Location: My Hampshire Hill

Post by Bill Shurvinton »

Yes, but you would still have to run them wasted spark. Best bet is to run 2 additional VB921, but in parallel with the 2 for a waste spark setup.

Not convinced they will give you any power gains in your application though.
Post Reply