Ignition table for BMW

Vezzel 309 GTI16 · Post by **Vezzel 309 GTI16** » Wed Mar 22, 2006 1:14 pm

Hi - anybody got a ignition table for a BMW E30? Special for an 2,5 or 2,7 litres.

Its to get a good starting point on a 2,7 ETA with a 2,5 head on it.
Using MSnS-E code on a 2,2-board...

mops · Post by **mops** » Wed Mar 22, 2006 2:03 pm

yep, I'm definitely keen for that one too

Xillur · Post by **Xillur** » Thu May 04, 2006 2:55 am

well I made some manual logging a while ago on my stock Motronic 1.3 ECU. Using a motortester to read out the ignition angle and a vacuumgauge in the manifold...

I havent tested it since iÂ´m still struggling with my 60-2 wheel decoder setup

if any of you guys have any suggestions, please let me know!

http://www.msefi.com/viewtopic.php?t=18502

mops · Post by **mops** » Tue May 09, 2006 5:36 pm

most helpfull...
thankyou...

WHY DA HELL 17 degrees at 4600rpm @ WOT ????

funny, thats where the torque is....

i was datalogging motronic 1.0 on my 325i with LC-1 wbo2 and map.... if anyone wants i can post ms datalogs here.